Watts LFH7C User Manual download pdf

IS-

Limited Warranty: Watts Regulator Co. (the “Company”) warrants each product to be free from defects in material and

workmanship under normal usage for a period of one year from the date of original shipment. In the event of such defects

within the warranty period, the Company will, at its option, replace or recondition the product without charge.

THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY GIVEN BY THE COMPANY

WITH RESPECT TO THE PRODUCT. THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE

COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT

LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach

of warranty, and the Company shall not be responsible for any incidental, special or consequential damages, including

without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product does not

work properly, other costs resulting from labor charges, delays, vandalism, negligence, fouling caused by foreign material,

damage from adverse water conditions, chemical, or any other circumstances over which the Company has no control.

This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or

alteration of the product.

Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion

or limitation of incidental or consequential damages. Therefore the above limitations may not apply to you. This Limited

Warranty gives you specific legal rights, and you may have other rights that vary from State to State. You should consult

applicable state laws to determine your rights. SO FAR AS IS CONSISTENT WITH APPLICABLE STATE LAW, ANY IMPLIED

WARRANTIES THAT MAY NOT BE DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL

SHIPMENT.

IS-

⁄8"-7

OPEN END, only

outlet on fixture.

Hot

Cold

⁄8" Mixed

Water Line

Watts 27

Drain

Watts 27

Watts

⁄8" 7

Maintenance

Annual inspection is required, since cleaning and checking of all water system

safety and control valves assures maximum life and proper product function.

For technical assistance contact your local authorized Watts agent.

Installation (Examples only)

Note: In those areas where these types of installations are approved, it is subject

to the approval of the local or state code inspection authority.

Applications

Series

⁄8" 7 or LF7 is especially recommended for shampoo sink or similar appli-

cations requiring

⁄8" female connection for convenient attachment.

It is also suited for other continuous or intermittent pressure type installations

where water distribution piping flows to potentially contaminated containers,

equipment or sinks. In the event of negative supply pressures, such contaminated

fluids must not be allowed to backflow to the potable water supply source by

backsiphonage or other cause.

Installation

Before installing, flush out pipe lines to remove scale and other foreign matter. The

valve can be installed horizontally or vertically. Install the valve in the line with the

arrow on valve body pointing in the direction of flow. Teflon

tape is recommended

for the pipe threads. To maintain the valve discs in a clean operating condition, we

strongly recommend a pipe line strainer (Watts model 27) be installed in the supply

line before the Series

⁄8" 7.

Temperature and Pressure

Maximum Pressure - 150psi (10.3 bar)

Minimum Pressure - 10psi (69 kPa)

Working Temperature - 33°F – 180°F (0.5°C – 132°C)

Maximum Recommended Flow - 10 gpm

⁄8" 7/LF7,

⁄4" H7 Total Repair Kit

ORDERING CODE KIT NO. SIzE

0886009 RK7/7C T

⁄8" (10mm)

⁄4" H7, H7C

Kit consists of: First & second check,

Tailpiece O-ring, Adapter O-ring and Body

O-ring.

Hose Conversion Kit

Converting

⁄8" 7, 7C Dual Check Valve

to a hose connection

⁄4" H7, H7C Dual

Check Valve for washing machines

ORDERING CODE KIT NO.

0061930 HK7

Kit consists of: Tailpiece and Union Nut.

⁄8" 7/LF7, 7C/LF7C and

⁄4" H7, H7C

Dual Check Valves

Installation Instructions

Teflon

is a registered trademark of the E.I. Dupont de Nemours & Company, Incorporated.

Important: For maintenance accessibility, these devices must not be installed

inside a wall or any concealed location.

USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com

Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca

A Watts Water Technologies Company

1 2

Summary of Contents

Page 1 - ⁄4" H7, H7C

Page 2

Related models: H7C | H7 | 7C |

Comments to this Manuals

No comments

Watts LFH7C User Manual

Browse online or download User Manual for Accessories for water Watts LFH7C. Watts LFH7C User Manual

Summary of Contents

Related models: H7C | H7 | 7C |

Comments to this Manuals

Related products and manuals for Accessories for water Watts LFH7C