CrimpRings
TM
* The wetted surface of this product contacted by consumable water
contains less than one quarter of one percent (0.25%) of lead by
weight.
For Residential & Commercial Applications
ES-WP-CrimpRings
Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
–––––––––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Engineer
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Representative
––––––––––––––––––––––––––––––––––––––––
LEAD FREE
*
Copper CrimpRings
™
Sizes:
3
/8" - 2"
Copper CrimpRings™ are used to make a leak tight and
secure crimped connection of brass (ASTM F1807) or plastic
(ASTM F-2159) PEX fittings to PEX (ASTM F-877) CTS sizes
SDR9 pipe.
Specifications
System shall be plumbed using Watts WaterPEX® cross-linked
polyethylene pipe and all joints shall be made using Watts Lead
Free* Brass and/or Poly-alloy PEX fittings using the Watts cop-
per CrimpRing™ as outlined in the Watts Installation Guidelines.
Installation Note
Copper CrimpRings™ must be installed in accordance with all
Watts installation procedures, including information provided in
installation manual and guidelines.
Installation of Copper CrimpRings requires the use of a properly
calibrated manual, electric or battery operated crimping tool
with the proper ASTM F-1807 sized jaw. For 1
1
/2" and 2"
CrimpRings, an electric or battery operated crimping tool must
be used to assure proper installation.
All connections made with a copper CrimpRing must be
checked with a GO/NO Go gauge after completion of the
connection.
Large diameter LF Brass CrimpRing fittings (1
1
/2" to 2") may
only be installed using a corresponding Watts Series WP14C
Copper CrimpRing, The recommended crimping method
requires an electric or battery operated crimping tool using an
ASTM F-1807 certified crimping jaw. All crimp connections
must be checked with a GO/NO GO Gauge provided by the
tool manufacturer.
Approvals
ASTM NSF
•ManufacturedinaccordancewithAmericanSocietyfor
Testing and Materials (ASTM International) F877 and F1807
•ListedbytheNSFInternationaltoNSFStandards14and61
for use in potable water systems
This product is UL 1821 listed for PEX multipurpose sys-
tems used to support NFPA 13D when used with Watts
(Residential Fire) RF PEX
TM
Tubing, RF PEX
TM
Fittings, RF
PEX
TM
Sprinkler Fittings and Copper CrimpRings
TM
. You must
refer to Watts Residential Fire at watts.com/resfire for further
product specification and safety information. DO NOT USE
OTHER PRODUCTS WITHOUT SUCH DESIGNATION IN FIRE
PROTECTION APPLICATIONS.
MODEL SIZE TYPE PACKING WEIGHT
in. mm lbs. kgs.
WP14C-06PB
3
⁄8 10 Cu Crimp Ring .1 .05
WP14C-08PB
1
⁄2 15 Cu Crimp Ring .1 .05
WP14C-12PB
3
⁄4 20 Cu Crimp Ring .2 .09
WP14C-16PB 1 25 Cu Crimp Ring .2 .09
WP14C-20PB 1
1
⁄4 32 Cu Crimp Ring .3 .14
WP14B-24PB
1
⁄2 28 Cu Crimp Ring .4 .18
WP14B-32PB 2 52 Cu Crimp Ring .4 .18
Dimensions – Weights
ES-WP-CrimpRings 1345 © 2013 Watts
USA:No.Andover,MA•Tel:(978)688-1811•Fax:(978)794-1848•www.watts.com
Canada: Burlington, ON•Tel:(905)332-4090•Fax:(905)332-7068•www.watts.ca
A Watts Water Technologies Company
Comments to this Manuals