Watts WPCRT-1 User Manual download pdf

Heavy-duty tool for the removal of WaterPEX

CrimpRings

™

with out damaging the brass PEX

fitting

Specifications:

Removal of improperly crimped copper PEX crimp rings shall be done using a

Watts CrimpRing™ Removal Tool No. WPCRT-1.

Installation Notes:

1. Test the tool before use. Tool is Factory calibrated prior to shipment, for use on

⁄2",

⁄4", and 1" Copper Crimp Rings. Adjust tool as necessary.

2. This tool should only be used on Brass PEX fittings, Do not use this tool to remove

a crimp ring from a plastic (poly-alloy) fitting or a copper PEX connection.

3. Carefully examine the fitting after crimp ring removal. If the fitting barbs have been

scratched or damaged, DO NOT REUSE, as leaks may result.

4 See below for tool use instructions

Removal Tool Instructions

Important: After removal of crimp ring, carefully inspect the barbs on the fitting. If barbs

are scratched or deformed, discard the fitting, and do not reuse. Leaks may occur on

damaged fittings that are reused.

CrimpRing

™

Removal Tool

IS-WP-WPCRT-1

Crimp Ring

™

Removal Tool

Insert Removal

Tool into fitting and

cut through the

crimp ring.

Rotate the fitting

180º and com-

pletely close the

tool. Remove ring.

Pinch the tubing

with the tool every

20-30º.

Remove the tubing.

Fitting Size

Adjustment

Cut Depth

Adjustment*

*Factory Preset

1 2

Summary of Contents

Page 1 - Removal Tool

Heavy-duty tool for the removal of WaterPEXCrimpRings™with out damaging the brass PEXfittingSpecifications:Removal of improperly crimped copper PEX cr

LIMITED WARRANTY: A. Watts Regulator Co. (ìWattsî) warrants its WaterPEX®cross-linked polyethylene tubing, barbed PEX fittings, brass and plastic Quic

Comments to this Manuals

No comments

Watts WPCRT-1 User Manual

Browse online or download User Manual for Accessories for water Watts WPCRT-1. Watts WPCRT-1 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories for water Watts WPCRT-1