Watts CWS200 User Manual download pdf (Page 2)

Feed Water Guidelines

pH ....................... 6 to 10

Hardness (maximum) ......... Depends on customers acceptable

hardness leakage level.

Water Pressure ............. 25psi to 125psi (171 kPa to 8.5 bar)

Temperature ............... 34 - 110°F (1 - 43°C)

Free Chlorine (maximum) ...... 1mg/L

Iron (maximum) ............. 1mg/L

Oil and H2S ................ None Allowed

Turbidity .................. Less than 5.0 NTU

For all other guideline information please contact your Watts represen-

tative.

Specifications

USA: Tel. (800) 659-8400 • www.watts.com

Canada: Tel. (888) 208-8927 • www.watts.ca

A Watts Water Technologies Company

Note: Do not use with water that is microbiologically unsafe or of

unknown quality without adequate disinfection before or after the system.

Dimensions - Weight

CWS200 SERIES

OVERALL OVERALL OVERALL

mOdEL TANK IN OUT HEIGHT dEPTH WIdTH BRINE TANK

M4543W 14"X65" 68.3" 68.3" 74.2" 15.2" 17.7" 18"X40"

M4547W 16"X65" 68.0" 68.0" 73.6" 16.2" 18.5" 18"X40"

M4548W 18"X65" 70.5" 70.5" 76.1" 20.1" 20.5" 24"X41"

M4552W 21"X62" 70.4" 70.4" 76.0" 21.1" 21.1" 24"X50"

M4558W 24"X72" 77.5" 77.5" 83.1" 24.1" 24.1" 30"X50"

M4559W 30"X72" 77.5" 77.5" 83.1" 30.1" 30.1" 39"X48"

M4560W 36"X72" 87.3" 87.3" 92.8" 36.1" 36.1" 39"X48"

Note: This information is not intended to replace the product installation and safety information available or the experience of a trained prod-

uct installer. Please refer to the product installation and safety instructions for further information.

mINERAL TANK BRINE TANK SOfTENING LBS. SALT PER fLOW RATE & PRESSURE

TANK RESIN GRAVEL TANK SALT CAPACITY REGENERATION SERV dROP BKW

mOdEL SIZE ft

SIZE fILL mAx mIN mAx mIN GPm PSI GPm

M4543W 14x65 3 60 lbs. 18x40 400 90 K 60 K 45 18 39/50 15/25 5

M4547W 16x65 4 80 lbs. 18x40 400 120 K 80 K 60 24 47/60 15/25 7

M4548W 18x65 5 100 lbs. 24x41 600 150 K 100 K 75 30 53/69 15/25 10

M4552W 21x62 7 100 lbs. 24x50 600 210 K 140 K 105 42 66/85 15/25 13

M4558W 24x72 10 200 lbs. 30x50 1200 300 K 200 K 150 60 73/94 15/25 15

M4559W 30x72 15 400 lbs. 39x48 2200 450 K 300 K 225 90 84/109 15/25 25

M4560W 36x72 20 500 lbs. 39x48 2200 600 K 400 K 300 120 93/119 15/25 35

Note: Capacities are based on resin manufacturer’s data and are dependent upon influent water TDS, temperature, bed depth, and

flow rates. Feed water must be free of oil and color. Pipe size, tank size, and space requirements are in inches. Capacities and flow rates

expressed above are per tank. Flow rates listed at 25psi drops are for intermittent peak flow rates and are not to be used as continuous flows.

Note: Flow rates listed above are based on pressure drop only. Selecting a system based on pressure drop alone does not guarantee that

the system will proved adequately softened water. System selection should be based on resin quantity, capacity required, feed water analy-

sis, and application requirements.

Ordering Information

mOdEL dESCRIPTION SPACE REQUIREd WEIGHT

LBS KGS

M4543W A0090FM200WE with turbine meter 24 x 44 x 87 265 120

M4547W A0120FM200WE with turbine meter 24 x 46 x 87 350 159

M4548W A0150FM200WE with turbine meter 24 x 48 x 89 400 181

M4552W A0210FM200WE with turbine meter 24 x 52 x 89 600 272

M4558W A0300FM200WE with turbine meter 30 x 60 x 96 710 322

M4559W A0450FM200WE with turbine meter 39 x 75 x 106 1160 526

M4560W A0600FM200WE with turbine meter 39 x 81 x 107 1560 707

1 2

Comments to this Manuals

No comments

Watts CWS200 User Manual Page 2

Comments to this Manuals

Related products and manuals for Conditioners Watts CWS200