Watts WP18P-16PB User Manual download pdf

Poly-Alloy

CrimpRing

™

Tees

Poly-Alloy CrimpRing

™

Tees are used for making directional

changes in potable systems.

Specifications

System shall be plumbed using Watts WaterPEX

cross-linked

polyethylene pipe, and all joints shall be made using Watts

brass CrimpRing

™

and/or poly-alloy CrimpRing

™

fittings using

either the Watts copper CrimpRing

™

or stainless steel

CinchClamp

™

** crimping methods as outlined in the Watts

WaterPEX

Installation Guidelines.

Installation Note

CrimpRing

™

Tees must be installed in accordance with all Watts

WaterPEX

installation procedures, including information provid-

ed in WaterPEX

installation manual and guidelines.

Approvals

• Manufactured in accordance with American Society for

Testing and Materials (ASTM) F-877 and F-2159

• Listed by the National Sanitation Foundation to NSF

Standards 14 and 61 for use in potable water systems

• Listed by NSF to be in compliant to the Uniform Plumbing

Code

• Labeled B137.5 which indicates that it is compliant to the

CSA Standards B137.5

• Manufactured from Acudel

engineered thermoplastic resin.

For Residential and Commercial Applications

ES-WP-PATees

Job Name

–––––––––––––––––––––––––––––––––––––––––––

Contractor

––––––––––––––––––––––––––––––––––––––––––––

Job Location

–––––––––––––––––––––––––––––––––––––––––

Approval

–––––––––––––––––––––––––––––––––––––––––––––

Engineer

–––––––––––––––––––––––––––––––––––––––––––––

Contractor’s P.O. No.

––––––––––––––––––––––––––––––––––

Approval

–––––––––––––––––––––––––––––––––––––––––––––

Representative

––––––––––––––––––––––––––––––––––––––––

WP18P

CrimpRing

™

Tee

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,

please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-

out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

LEAD FREE

Warning!

If connections must be made in temperatures below 30°F,

caution must be taken to allow the WaterPEX to form a proper

seal against the barb. Apply the connection slowly to ensure

the PEX material conforms to the barb.

* The wetted surface of this product contacted by consumable

water contains less than one quarter of one percent (0.25%) of

lead by weight.

** Note: Watts WaterPEX CinchClamp

™

fittings should not be used

with wrot copper PEX fittings.

1 2

LEAD FREE 1
Dimensions – Weights 2

Summary of Contents

Page 1 - LEAD FREE

Poly-Alloy CrimpRing™ TeesPoly-Alloy CrimpRing™ Tees are used for making directional changes in potable systems.SpecificationsSystem shall be plumbed

Page 2 - Dimensions – Weights

Dimensions – Weights MODEL 1 2 3 PKG. WEIGHT in. mm type in. mm type in. mm type lbs. kgs. WP18P-08PB 1⁄2 15 Crimp Fitting 1⁄2

Comments to this Manuals

No comments

Watts WP18P-16PB User Manual

Browse online or download User Manual for Accessories for water Watts WP18P-16PB. Watts WP18P-16PB User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories for water Watts WP18P-16PB